Kallipr Captis Pulse Lite 1.0, Руководство пользователя

Страница: 7 / 7

Captis Cloud Configuration Guide Page | 6
Finally, install the sealing nut to the clamp ring by screwing. Make sure to apply the
correct tortional force.
Clamping ring torque: 6 ~ 8kgf.cm(0.58 ~ 0.78 Nm)
Figure 4
4 Testing
Upon completion of the sensor termination, the connector may be secured to the Captis
receptacle.
Ensure that the Captis is correctly configured to receive the data from the connected
sensor.
If there is no data being transmitted by the sensor to the Captis device, please review
the terminations and sensor output.
If the issue persists, please contact support@Kallipr.com