20
(3) Clean the probe with sterile water to thoroughly remove residual chemicals.
(4) Clean the water off the probe surface with sterilized cloth. Never dry the probe by heating it.
Fig. Wrong 6.5MHz probe sterilization Fig. Correct 6.5MHz probe sterilization
4. Clean the probe cable and its connector
(1) Clean the probe cable and its connector with soft, dry cloth.
(2) In case of die-hard blots, clean with soft cloth dipped in moderate detergent and then air-dry it.
5. Clean the LCD screen
Clean the liquid crystal display with dry, soft flax or anti-static LCD clean cloth.
6. Clean the control panel, shell
Clean the instrument surface with soft, dry cloth or with soft cloth dipped in moderate water cleaning
media to remove the blots, and then dry the instrument with soft, dry cloth or with air.
9.1.2 Use and maintenance for the charging battery
1. Only use charger and corresponding model of battery provided by KaiXin Company.
2. The output port of adapter plugs into the input port of charger to charge; the minimum charging time
is 3 hours and up to 6 hours. Over-charging or discharging will shorten the battery life; the full
charged battery can be used for 2 ~ 3 hours.
3. Battery is consumable; the battery cycle-life is based on the times of charge and discharge as unit.
When the use time reduced significantly compared with normal conditions, the battery should be
promptly replaced.
4. The excess high or low temperature will affect the charging and discharging performance, and short
the battery life and capacity.
Attention
:
1. Please carefully read the instructions provided by disinfectant provider about the
sterilization liquid concentration and sterilization method as well as the description of
the dilution method.
2. Glutaraldehyde liquid should use the activator.
Attention:
Do not clean the screen with hydrocarbon detergent for example alcohol etc
or OA equipment cleaning media. These kinds of liquid may degrade the internal
function of the screen.
Attention:
Battery charger shall meet the requirements of the IEC60601-1 standard.
Attention:
Battery is consumable; the battery cycle-life is based on the times of charge
and discharge as unit. When the use time reduced significantly compared with normal
conditions, the battery should be promptly replaced.