14
selected body mark;
3.
Press direction keys or operate mouse to change the probe mark position; press key to change
probe mark direction;
4.
Press key to quit body mark and probe mark status;
5.
Press
key to quit froze and body mark status.
6.8 Image storage and recall
6.8.1 Save image
Storage to main unit
1. Freeze the image;
2. Press key, a “Save” prompt appears on lower right corner of the screen;
3. Press direction keys
to select the current image code, such as choose “003”;
4. Press key, the current image is saved in the frame for coded “003”. The saved image code is
preceded with asterisk “*”;
5. Press key to quit saving status and press
key to return to real-time status.
Storage to U disk
1. Plug U disk;
2. Freeze the image;
3. Press key, a “Save” prompt appears on lower right corner of the screen;
4. Press key to appear “Img” prompt, after the prompt disappear, the current image is saved in the
folder for patient number (ID) as folder name in the U disk, and file name is arranged by the order of
serial number. If user did not enter the number (ID), the folder name defaults to “USER”;
6. Press key to quit saving status and press
key to return to real-time mode.
Explanation: The images stored in the U disk can only be read out in your computer.
6.8.2 Open image
1. Freeze the image;
2. Continuously press key twice, a “Read” prompt appears on lower right corner of the screen;
3. Press direction keys
to select the image code need to be read out, such as choose “003*”;
4. Press key, the image stored in frame “003*” is read out;
5. Press key to quit reading status and press
key to return to real-time status.
Explanation: When reading images, it must choose the image code with mark “*”.
6.9 Text Input
Operation steps:
1.
Freeze the image;
2.
Press key, the cursor is located behind NAME;
3.
Press key again or right click mouse, at the same time characters input menu will be shown at
the bottom of the screen:
Caps 0 1 2 3 4 5 6 7 8 9 a b c d e f g h
Shift i j k l m n o p q r s t u v w x y z
Press direction keys or operate mouse to move cursor to point to Caps, and then press key or left
click mouse to achieve
capital and small letter conversion; If the cursor point to Shift, press key
or left click mouse again to achieve the conversion between the letter and punctuation;
4.
Press direction keys to choose “numbers” or “characters” and press key to confirm; Or operate
mouse to click “numbers” or “characters” to input;
5.
After inputting name, press key and then press direction key to move cursor to “ID” and