Kaixin KX5600 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 49

Kaixin KX5600 Скачать руководство пользователя страница 40

Full Digital Ultrasonic Diagnostic Instruments

User’s Manual V1.00

- 33 -

7. Clean the control panel, shell and probe bracket

Clean the instrument surface with soft, dry cloth or with soft cloth dipped in moderate water

cleaning media to remove the blots, and then dry the instrument with soft, dry cloth or with air.

8. Clean the video recorder and foot switch

(1) Use the soft dry cloth to wipe the video recorder and foot switch.
(2) If it is difficult to wipe away the blemish, clean with soft cloth dipped in moderate

detergent and then air-dry it.

13.2 Replace the fuse

Replace the fuse is to replace the power adapter.

13.3 Use and maintenance for the rechargeable battery



The battery use for main unit

1. Only use charger and battery pack (model HYLB-1614) provided by KaiXin Company.
2. The output port of adapter plugs into the input port of “charger” to charge (see the charge

sketch map for main unit battery). The charge indicator is green and blinking state when
charging; the charge indicator is green and no blinking when fully charged.

3. The charging time is about 3 hours, over-charging or discharging will shorten the battery life;

the full charged battery can be used about 3.5 hours.

Charger

Battery pack

12V

DC power input port

Fig. the charge sketch map for main unit battery



The maintenance for the rechargeable battery pack

1. Battery is consumable; the battery cycle-life is based on the times of charge and discharge as

unit. When the use time reduced significantly compared with normal conditions, the battery
should be promptly replaced.

2. The excess high or low temperature will affect the charging and discharging performance, and

short the battery life and capacity.

Attention:

Main unit will power off automatically when the electric quantity is too

low. Connect the main unit to external power supply and recharge the battery, or turn
off the machine to recharge.

Attention:

The fuse is inside the power adapter. Fuse shall be replaced by professional

engineer.

«
...
38
39
40
41
42
...
»

Содержание KX5600


















































Отзывы:

Нет отзывов