Full Digital Ultrasonic Diagnostic Instruments
User’s Manual V1.00
- 18 -
automatic playback status. Press
key to exit playback status. Press
key unfreeze and exit
playback status.
Playback measurement
In manual playback status and choose measured image, press
key to exit playback status
and perform measurement. The detail measurement method refers to corresponding chapters.
Press
key again to return to manual playback status.
Note: If the displayed images appear abnormal, that is without enough storage time and the
images have not been stored full.
7.12 Annotation
1. In frozen status, press
key, the cursor will be showed on the screen;
2. Move the cursor to the needed position, press
『
Set
』
key;
3. Press character keys to input the annotation, press
『
Set
』
key to confirm. It can annotate many
times by moving the cursor;
Press
key to switch between capital letters and small letters. When capital, the "Caps"
mark is shown in the lower right corner of the screen.
Press
key to switch between upper function and lower function of a key. When annotating
the special characters, the "Shift" mark is shown in the lower right corner of the screen.
Press
key to enter a space during the text input.
4. If need to be modified during annotation, press direction keys
to move the cursor to the
character behind you want to modify, press
key to delete and input again;
5. If need to input arrow, press
key, move the cursor to the desired position to add arrow,
rotate
or
knob to change the direction of the arrow, press
key, the selected arrow
is to be added to the cursor position;
6. Press
key to exit annotation after finish inputting;
7. Press
key to clear the annotation;
8. Press
key to unfreeze and clear the screen.
7.13 M image function
7.13.1 M work mode selection
1. In real-time mode, move the cursor to the
〖
M Work Mode
〗
of the
【
M Mode Menu
】
of M mode;
2. Press
『
Set
』
or
『
Back
』
key to choose M work mode.
Explanation: Work mode 0 is scanning way; work mode 1 is rolling way.
7.13.2 M speed selection
1. In real-time mode, move the cursor to the
〖
M Speed
〗
of the
【
M Mode Menu
】
;
2. Press
『
Set
』
or
『
Back
』
key to change the M speed. The scanning speed of M mode will be
displayed in the
〖
M Speed
〗
of left menu.
Explanation: M speed is fixed at 4 in B|M mode.
7.13.3 Dynamic range, edge enhancement, compression curve and post-process
They are the same as B image function.