Full Digital Ultrasonic Diagnostic Instruments
User’s Manual V1.00
- 17 -
Press
key to switch puncture guide line, press direction keys
to change the angle of the
second puncture guide line, press direction keys
to change the start position of the second
puncture guide line. Press
key to exit the puncture guide status.
7.8 Lithotripsy positioning line
1. In real-time mode, move the cursor to the submenu
〖
ESWL Line
〗
of
【
B Mode Menu
】
;
2. Press
『
Set
』
key, ESWL line will be shown in the image area and the measurement depth of
ESWL “X: 0.0mm” is real-time shown at the lower left corner at the same time, operate
trackball or up/down direction keys to positioning ESWL depth;
3. Press
key exit the ESWL line status.
7.9 Body mark
This system contains 27 body marks. The parts of body marks are divided into 7 categories, as
follows:
1. General
2. Bovine
3. Canine
4. Equine
5. Feline
6.Cardiac
7. Swine
Operation steps:
1. In froze status, press
key to enter
【
Body Mark
】
dialog;
2. Move the cursor to the page of the body part you need, press
『
Set
』
key, the body mark on this
page will be showed in the dialog;
3. Move the cursor to the body mark you need, press
『
Set
』
key, the body mark will be selected
and showed at the lower right corner of the screen;
4. Operate the trackball to move the position of the probe mark, rotate
or
knob to
change the direction of probe mark, press
or
key to confirm;
5. Press
key to clear the body mark and probe mark.
7.10 One-key storage
Freeze the current image; press
key, the prompt “Been stored” appears at the left corner of
the screen, the content displayed on the current screen will be stored to the folder in the C disk or U
disk. Folder name and file name will be automatically generated by the system based on the current
date and time.
Such as:
Folder name: “05_06_14”, File name: “16_32_56.bmp”
It represents that the diagnostic images at 16:32:56 on May 6
th
2014.
Explanation: The functions for
and
key are the same.
7.11 Play back and Measurement
Play back
In real-time mode, the system is always saving the scanning image. The playback images are
for a period time images before freeze.
Freeze image, press
key to enter the manual playback status, press
direction keys
or move the trackball to choose the image needed playback. Press
key again to return to
Attention:
1. When you plug in U disk, the default storage path is U disk; if you do not plug in U disk,
the default storage path is C disk.
2. Operating U disk should allow sufficient storage time to prevent the files from missing.
3. U disk storage should be concerned about the free space to prevent the invalid storage.