1 8
1 7.
OPERATION
ALIGNMENT OF THE CIRCULAR
-
OR PROFILED KNIFE
By opening the star head screw (1 ), you can set the grinding angle. For less than
1 20 mm, the blade angle is set counter-clockwise; over 1 20 mm, in a clockwise direction.
By opening the star head screw (2), you can move the entire take-up stand in the
Z direction and re-clamp.
Please ensure that your circular blade, respectively punch blade always operates within
the grinding area in order to ensure the angle preservation across the entire blade.
The grinding area is marked in red (see photo)
.
With regrads to 3 axes configuration:
After clamping the work piece, a reference run with the Y axis must be executed!
Clockwise
(1 ) Angle setting
(2) Take-up stand adjustment
Grinding area
