1 9
1 8.
FIXATION OF A CIRCULAR
-
OR PROFILED KNIFE
Centre the circular blade or punch blade with respective reduction ring on the clamping
flange. Clamp the circular blade with the included disk or clamping nut in the clmaping
flange.
NOTE: when loosening or tightening the clamping nut, you must keep the grinding
spindle locking mechanism pressed.
ATTENTION! Risk of injury when tightening or lossening the blade!!!
The support mounting piece is only used for circular blades.
After clamping the circular blade, place the mounting piece on the back of the blade.
Adjust the mounting piece so that it is placed correctly on the back on the cutting edge
and respectively fits closely on the angle and rotates accordingly. Respective of the blade
type, you can adjust the angular value of the mounting piece head at your direction. The
mounting piece servs to support the circular blade and allows the circular blade to
provide a burr-free grinding.
Grinding spindle-
locking mechanism
Grinding spindle
Clamping nut
Clamping flange
Lynette
adjustment
Angular
adjustment