25
The RMS-CNC grinding wheel is equipped with a ER32 collet system, which allows for
the ultisation of collets with a clamping diameter up to 22 mm, as well as the intake of
various clamping flanges and special clamping flanges directly in the collet cone.
23.
SUPPORT OF CIRCULAR KNIFE AND
SHAFT OR KNIFE MOTOR
In order to exchange the intake, remove the allen screw M6 with the included allen key
SW 5.
Use the included allen screw M 8 and utilising it, press the intake out of the cone.
Allen screw SW 5
Thread for collet - wing nut
Grinding spindle for ER32
collets
Thread M6
