5.1.4 Assigning logger(s)
The system automatically opens the
< Logger > tab.
Next to
< Overview >, the designated master logger is identified in green, any other loggers are
shown in orange.
If multiple loggers are used in a measurement, you must register all other loggers in this
screen.
Fig. 23 Registering loggers for measurement
1. Click
< Register and connect all loggers > and then < OK > to confirm the save message re‐
turned by the system.
All registered loggers are now identified in green.
Fig. 24 Allocation of channels (analog inputs)
2. Click the registered (green) logger.
3. Check the allocation of the analog inputs.
5
Operation
5.1
Example of a measurement with ADA 2
No.: 901711 00 E
Operating manual measuring and analysis system
ADA 2 EFFICIENCY OPTIMIZATION
23