2. Drag the required symbols from the left margin in the sequence required for the measurement
into the screen centre.
Fig. 13 Logically linking the sketch elements
3. Connect the components as follows:
■ Left-click
< Connect >:
A "Select source" text banner appears at the cursor.
■ Left-click the first symbol of the sketch (source). A "Select target" text banner appears at
the cursor.
■ Left-click the second symbol of the sketch (target). A "Select source" text banner appears
at the cursor.
■ Left-click the second symbol of the sketch again.
─ The first and second symbol are now logically connected, as indicated by a connecting
line.
─ The second symbol is now selected as the source for the next logical connection.
─ A "Select target" text banner appears next to the cursor in order to connect the second
(source) with the third symbol (target).
■ Proceed in the same manner with all other symbols in your sketch. By clicking a symbol
twice successively, you define it at first as the target (of the previous symbol) and then as
the source (of the following symbol).
5
Operation
5.1
Example of a measurement with ADA 2
No.: 901711 00 E
Operating manual measuring and analysis system
ADA 2 EFFICIENCY OPTIMIZATION
17
