©2012 Kaelus, Inc. All rights reserved
.
ACU0001F1V1-1 User Guide
12
Click on the Set button to apply the changes. When the Set Power process is
completed, the following pop-up window is displayed. Click on the Close
button to close it.
3.1.4
Device Setting
In the Device Setting section, select the Scan Length value used when
scanning for devices. The default value is 3 for software versions before
v3.1.7 or 4 for software version v3.1.7. This value can be increased if a
connected device is not being distinguished from another during a scan.
You can also configure alarm outputs in the Device Setting section.
Field Name
Description / Constraint
A l a r m Ou t p u t
To e n a b l e o r d i s a b l e t h e a l a r m output. The default setting is
"Enable".
A l a r m Ou t p u t D e l ay
T i m e ( h o u r s )
To s e l e c t d e l ay o f a l a r m r e p o r t i n g t i m e . I f a ny a l a r m i s s t i l l
b y t h e s e l e c t e d t i m e , t h e n r e l ay a l a r m output is triggered.
The default setting is 1 hour.
A l a r m Ou t p u t S t a t u s To d i s p l ay c u r r e n t a l a r m st a t u s , which is "Normal" or "Alarm"
The software continuously checks device’s alarm status and waits the
configured alarm output delay time once an alarm is detected before
