Kaden KU5, Руководство по установке

Страница: 30 / 40

30
Kaden Installer's Manual
Ducted Gas Heaters
All Kaden heaters have been factory tested, but should be commissioned and adjusted in accordance with the
following instructions to ensure efficient and optimal heating performance.
Remember:
•
Switch the mains power OFF before touching any wiring.
•
All these steps must be carried out by a qualified trades person.
•
If the heater cannot be adjusted to operate in accordance with these instructions, then contact:
1300 4KADEN (1300 452 336)
For technical support
please call.
9.1 HEATER CONTROL SETTINGS
The heater module has 3 push buttons. On the right is a SET button and on the left are the UP and DOWN buttons,
refer to Diagram 22.
SET Button
DOWN Button
UP Button
KU4 / 5
Control Board
LCD
Diagram 22
To change an installer set-up parameter, press and quickly release the SET button, the word “SET” should now
appear on the top line of the screen.
The UP and DOWN buttons may now be used to increase or decrease the value on any setting displayed on the
screen.
By pressing the SET button the display will cycle through the installer set-up parameters in the order, which is
detailed in full in the following section, 9.2 Installer Parameters Control LCD Settings (Table 7) on page 31.
9. COMMISSIONING KU4 & KU5