Page 9
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2
KACO blueplanet 5.0 NX1 M2
NOTE
Scan device in Inverter List page
Under normal circumstances, you do not need to search for devices.
You might lose your previous inverter list and data due to the following cases:
›
The Wi-Fi stick has no communication with the inverter.
›
You have added a single inverter/multiple inverters connected to the Wi-Fi stick.
›
You have removed a single inverter/multiple inverters connected to the Wi-Fi stick.
›
You have replaced a single inverter/multiple inverters connected to the Wi-Fi stick.
By clicking “Inverter’s Parameter Setting”, you can set the inverter parameters. No passcode is required for the first use of
these parameter settings during the initial commissioning of the inverter. If the inverter parameters need to be changed
after the initial commissioning, a passcode will be required. The inverter-specific passcode can be obtained from KACO
Service.:
Fig. 21:
Inverter passcode