Page 25
KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2
KACO blueplanet 5.0 NX1 M2
2.2.16
Inverter parameters report
Tap ‘Inverter Parameter Report’, the next page will display the parameter.
E
x
port inverter parameter in file
1
After grid parameter setting, press “Inverter Parameter Report” menu, and gird parameter will be shown on page.
2
Press “Export PDF” button, the export file is located as a pdf file in “kaco.report” folder on your smart phone
Fig. 36: Parameters report
NOTE
Passcode
Parameter export without the inverter-specific passcode is only possible during initial commissioning. If an
export is required after initial commissioning, a passcode will be required. The inverter-specific passcode
can be obtained from the KACO new energy Service.
