Procedure
1 Connect the notebook to the Plant Controller via Ethernet or a WiFi-compatible Client.
2 Upload a pre-prepared device configuration (e.g. a device configuration that has been set up successfully on a single
device).
3 All of the connected devices are displayed on the webserver of the Plant Controller and are selected from a list.
ð
The device checks the saved configuration and emits a flash code via the LEDs on the front of the device which al-
lows conclusions to be drawn about the validity of the configuration (control panel [See sec-
tion 9.8.1
Page 68]).
4 If the configuration is valid, the parameters can be adopted by pressing the right-hand multi-function button on the
underside of the device.
»
Once the parameters have been adopted and the device has been restarted, the device is put into operation.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3
Page 43
EN-US
