Kabuto Japan IBUKI, Инструкция по эксплуатации

Страница: 4 / 32

ENG
Select the proper size!
NOTES BEFORE USE
Fasten the chinstraps before riding
Never use the helmet once impacted
Never modify the helmet
Helmet care and cleaning
Thank you very much for purchasing a Kabuto helmet.
This Instruction Manual describes proper handling, various functions
and remove/replace each part of this helmet. Please read this Instruction
Manual thoroughly prior to use. After reading this, keep the Manual for
future reference. The helmet is just one element of protection, it is intended
to minimize the risk in the event of an accident. It cannot ensure complete
safety. Use this helmet properly based on this understanding.
Please understand and follow the instructions and information in this
Instruction Manual to enjoy your safe ride.
It is very dangerous to wear too large sized helmet. This may wobble while riding. If you
wear a too small size helmet, it tightens up and hurts your head. Thus, it is important to
select the proper size.
In order to fully maintain the performance of this helmet, do not attempt to take apart or
change the helmet in any manner such as making holes in it, cutting it, scraping off the
protective liner, or modifying the straps.
The helmet is designed to be retained by straps under the chin. In order to assure
proper protection, the helmet should fit your head. When worn, adjust it to rest properly
on the head, securely fasten the chinstraps to ensure safety. The chinstraps prevent the
helmet from coming off in most cases.
Liners are essential for the intended performance of the helmet. This helmet has
been designed to absorb the impact energy when components as shell and liners are
partially destroyed by an impact. Even if visually no damage is apparent, it could be
seriously damaged by a small impact. Regardless of the degree of damage, the helmet
that underwent an impact or was abused even only once should not be used anymore.
Always handle the helmet with care and make sure that no one sits on it or drops it.
Clean the helmet with soft cloth, using common ph-neutral detergent diluted with clear
water. The cloth should not be soaking wet. Then wipe the helmet gently with a clean wet
soft cloth and leave it to dry completely, but not in direct sunlight. With regard to helmets
with removable interiors, carefully read the instruction manual for that model before
attempting to remove the interiors and carry out cleaning according to the explanation
provided. To clean the helmet, do not use saline water or hot water (above 50ºC).
ENG-3