Kabuto Japan IBUKI, Инструкция по эксплуатации

Страница: 14 / 32

ENG
II. How to Use Functional Components
•Flex the shield properly when fitting the Pinlock
®
Original Insert Lens. Otherwise,
eccentric pins may be damaged.
•Clean the inside of the shield before applying the Pinlock
®
Original Insert Lens.
Pay attention not to touch the anti-fogging part of the silicon seal on the Pinlock
®
Original Insert Lens.
•Do not use any petroleum products, thinner, glass cleaner, etc. It will degrade the
material of the Pinlock
®
Original Insert Lens.
•Do not leave the Pinlock
®
Original Insert Lens where the temperature may surpass
50ºC or near a heater, neither use a drier nor fire for drying. Heat may degrade the
material of the Pinlock
®
Original Insert Lens.
•Pinlock® Original Insert Lens is only for exclusive visors.
•If rain or water drops come in the space between the Pinlock® Original Insert Lens
and the shield, please detach the Pinlock® Original Insert Lens from the shield
and dry them out. Then, reattach the Pinlock® Original Insert Lens on the shield.
•Please remove the Pinlock® Original Insert Lens at times for maintenance.
Otherwise the silicon seal of the lens would adhere to the shield.
•Do not use any shields or pins other than exclusive ones for the Pinlock® Original
Insert Lens.
•Please be informed that if you are riding with the ventilations closed or using the
Wind Shutter, may cause the Pinlock® Original Insert Lens to become fogged.
•Please replace Pinlock® Original Insert Lens if the anti-fog performance decreases
and/or being scratched.
•Silicon seal may come into view depending on the riding position.
CAUTION!
CAUTION *Pinlock® Original Insert Lens
ENG-13