ENG
13
Remove/Replace Wind Shutter
The Wind Shutter is included in the
package as the standard accessory. This
accessory is intended to reduce the
introduction of wind from chin area while
riding. It can be attached and detached as
desired according to seasons and intended
applications.
Firmly hold the whole interlining area of the
Wind Shutter and push it on the direction of
the arrow on the figure. Then the hooks on
the Wind Shutter will be removed.
1. Check Fig.1 and make sure the side (inner side or outer side).
2. Check Fig.2. Push in the hook on the Wind Shutter into the holes inside the Chin
Cover. Follow the arrow direction to push in hooks.
Make sure to hold the whole interlining
area of the Wind Shutter to remove.
Do not forcibly pull out. The parts may
break.
Make sure to install the Wind Shutter securely. Insecure installation may cause
falling of the Wind Shutter while riding.
[To Remove Wind Shutter]
[To Attach Wind Shutter]
Wind Shutter
Wind Shutter
Wind Shutter
Wind
Shutter
Outer side
Inner side
CAUTION!
Fig.1
Fig.2
Fig.3
CAUTION!
ENG-26
Содержание Japan IBUKI
Страница 32: ......