ENG
9
Remove/Replace Chin Cover
To maintain the Chin Cover, you can remove the Chin Cover.
[To Remove Chin Cover]
1. Remove the shield.
(Please check
6
Remove/Replace Shield
)
2. Remove Shield Ratchets and Collars.
(Please check
8
Remove/Replace Shield
Ratchets
)
3. Place the helmet on the stable place, then
unlocking the Chin Cover by pushing the
lock lever forward and pull forward the Chin
Cover. Then the Chin Cover completely
removed.
[To Install Chin Cover]
1. Lock the Chin Cover by inserting the Chin
Cover to the helmet.
2. In reverse order of removing, attach both
side Shield Ratchets and Collars with Collar
Screws, then install the shield.
(Please check
8
Remove/Replace Shield
Ratchets
, and
6
Remove/Replace Shield
)
3. Open and Close the Chin Cover some
times, to check if they are all attached
properly.
Pushing the lock lever
forward, pull forward the
Chin Cover
Lock the Chin Cover by
inserting the Chin Cover
in the helmet
WARNING!
•Make sure to check the Chin Cover installed securely and moves properly
before using the helmet for riding. If the installation of the Chin Cover is
incomplete, it is very dangerous and may fall off while riding and may leads to
a serious accident.
•Make sure to check and tighten the Collar Screw regularly. Riding with the
loosen screws is very dangerous as the shield may be removed while riding,
and it may leads to the serious accident.
ENG-20
Содержание Japan IBUKI
Страница 32: ......
