Kaba SIMPLEX 5000 CYLINDRICAL, Руководство по установке

Страница: 14 / 24

14
J-3 Insert the supplied tailpiece (e) with the flat
installed vertically into the outside lever/knob
(b) as shown. Make certain you rotate the
tailpiece so that it aligns with the rear of the
core. For screw cap type cores (Schlage) (g),
the tailpiece must be assembled to the core
first, with the tailpiece vertically as
shown. Insert the core into the
outside lever/knob.
Note: To remove the outside lever/knob from the
outside unit assembly, follow the steps below.
J-4 Remove the interchangeable core (a).
Then remove the tailpiece (b).
Note: You may want to use needle nose pliers for
some tailpieces.
Insert the release tool (d) into the small
hole (f) under the lever/knob as shown.
Gently push lever/knob catch up until it
clicks. Remove tool, then remove outside
lever/knob (b).
J-5 For ASSA/Medeco/Yale interchangeable/
removable cores, the tailpiece must be
prepped for the desired length before
installation.
Note: When using a Yale core on a cylindrical latch application, measure the
door thickness of the intended application.
J-6 Notice the score marks on the flat portion
of the ASSA/Medeco/Yale tailpiece. Using
the diagram to the right, locate the score
mark on your tailpiece that matches your
core prep for the intended application, and
break the tailpiece off accordingly.
Note: Using two pairs of pliers, break the
tailpiece to the desired length of the intended
application by holding one pair of pliers on the
good side of the score mark and a second pair on
the other side of the score mark. Slowly move the
second pair of pliers up and down until the
unneeded portion of the tailpiece breaks free.
b
a
b
b
b
a
f
d
f
d
vertical
YALE 6 & 7 PIN,
CYLINDRICAL – THIN DOOR
(1 3
⁄
8
" (35 mm) to 1 1
⁄
2
" (38 mm))
(DO NOT SHORTEN TAILPIECE -
For 1 5
⁄
8
" (41 mm) to 2 1
⁄
4
" (57 mm))
ASSA/MEDECO 5, 6 & 7 PIN,
CYLINDRICAL – DO NOT SHORTEN
TAILPIECE
ASSA & MEDECO 6 PIN,
EXIT & MORTISE
MEDECO 5 PIN,
EXIT & MORTISE
YALE 6 & 7 PIN,
EXIT & MORTISE
b
b
g
e
e