8
2.
Enter the three-digit Master User ID
111
followed by the default Master User PIN
12345
.
G
R
3.
Enter the three-digit Master User ID
111
followed by the new Master User PIN.
G
R
4.
Enter the three-digit Master User ID
111
followed by the new Master User PIN
again for verification.
G
R
G
R
5.
Record the new PIN and store it in a secure place.
Note:
Once the Master User PIN has been set, the factory pre-set combinations will no
longer open the lock.
Set Lock ID
If you do not want to assign an ID to the lock, the default is “0000”.
Note:
We recommend that you set a unique Lock ID for each lock so that the lock’s
information can easily be identified for reporting purposes.
1.
Press
#
Y
, #
Y
and then
1
.
G
R
2.
Enter the Master User combination.
G
R
3.
Enter a four-digit number for the lock ID.
G
R
4.
Enter the number again for verification.
G
R
G
R
Toggle Sound On/Off
The Master User can toggle the sound “on” or “off”. If “on”, one beep sounds each
time the lock LED flashes.
Note:
The default value for the lock sound is “on”. This toggle can be changed at any time
except when the lock is in shelved mode or when the lock is disabled.
1.
Press
#
Y
, #
Y
and then
5
.
G
R
2.
Enter the Master User combination.
G
R
G
R
Change Reporting Capabilities
The default reporting mode of the lock enables all administrative lock personnel
(Master User and Manager User) to retrieve audit records or to retrieve user
information. However, the Master User can restrict these reporting capabilities.
To change the reporting capabilities of lock personnel, complete the following steps:
1.
Press
#
Y
, #
Y
, #
Y
and then
2
.
G
R
2.
Enter the Master User combination.
G
R
