1
Lock Modes
A lock is shipped from the factory with default lock “setup” values and a pre-set PIN
for locking and unlocking the lock. This is referred to as
Factory Mode
.
The lock is shipped with a default factory
Super Master User PIN
that can be set
(i.e., changed) when the lock is in Factory Mode. Once the Super Master User PIN is
set, the Super Master User combination can be used to shelve the lock in the event
that the Master User combination is lost. Refer to the
Super Master Operations
(Document # 3109.017) for more detail.
WARNING:
The setting of the Super Master User PIN is optional, however, if you do
not set the Super Master User PIN before setting the
Master
User PIN, all
Super Master User capabilities will be permanently lost.
The lock is removed from Factory Mode when the Master User PIN gets changed.
To remove a lock from an operational mode, one can “shelve” the lock which places
it in
Shelved Mode
.
Most
lock values are returned to the factory default. Refer to the
Shelve Lock operation for more detail.
Personnel Classifications
There are three different classifications of lock personnel:
•
Master User
- The
Master
User performs the initial lock setup activities and can also
shelve the lock. There is a maximum of one
Master
User per lock. The
Master
User
combination will also lock and unlock the lock.
•
Manager User
- A user added by the Master User. A Manager User can lock and unlock
the lock. A Manager User can also retrieve reporting data from the lock if authorized to
do so by the Master User.
•
Lock User
- A user who can take temporary ownership of a locker by setting a combina-
tion to lock and unlock the lock.
There can be a maximum of 126 users who can open this lock at specific times:
•
There can be a maximum of
one Master User and 124 Manager Users
, programmed
and capable of accessing the lock at any given time.
•
There can be a maximum of
one Lock User
(not including the Master or Manager users)
programmed and capable of accessing the lock at any given time.
Document Number 3110.017 Rev. A2 - 09/07
UNICON
TM
CL SERIES
M
ODEL
CL10
A
DMINISTRATIVE
O
PERATING
I
NSTRUCTIONS
