36
Install Lock Cover
A.
Locate the correct lock cover based on door handing. (
See Figure 30.)
(
Both a RHR (515031) and a LHR (515032) lock cover
are included in the Rim Exit Device box.)
B. Position
the lock cover over the lock cover mounting brackets. Locate the cover flush to the surface of the door and bias the
cover away from the door edge.
C.
Secure the lock cover to the lock cover mounting brackets using four (4) #8-32 x
5
/
16
” PHMS
(105034)
screws. (
See Figure 30.
)
Install Manual O/R Knob Label
Upon completion of the CDX-10 Lock and Exit Device installation, locate (
515045)
nameplate label. Remove paper
backing, orient correctly, locate concentrically while applying pressure to adhere the label to the knob.
CDX-10
Cover, LHR
(515032)
CDX-10
Cover, RHR
(515031)
CDX-10
Nameplate
(515045)
CDX-10
Nameplate
(515045)
Figure 30
36
Содержание DKX Series
Страница 1: ...Kaba Mas LLC DKX Series Type III Installation Instructions June 16 2020 550 1026 REV B June 2020...
Страница 37: ...NOTES...
Страница 38: ...NOTES...