5
FUNCTION PUSHBUTTONS
RUN - toggles between the multi-tank and the single tank readout.
PAGE Depressing this button from any other sub-level viewing or programming
screen will return to the active inventory screen last viewed.
PROG - turns on/off the system programming feature allowing for alterations of tank,
product and sensor parameters when required.
UNIT - toggles between pre-programmed units of measure (pounds and gallons or liters
and kilograms)
ALARM - changes screen to view alarm setpoint values in gallons. The multi-tank
screen will indicate all the HI- level values inditcated by an asterisk ( * )
and by pressing the up and down keys to the left of the readout the screen will
change to view MID (M) and LO (L) level values. The single tank screen will
display the HIGH - MID - LO for the tank selected. Press RUN/PAGE to return
to normal inventory display.
PROD - changes screen to view product names for all tanks from the multi-tank screen.
Product names are normally displayed on the single tank screen.
TIME - changes Multi-tank screen to view the zero offset values in ATOD counts of the
ZERO
transmitter output for all tanks. From the single tank screen the bottom
line will display the ATOD values of the offset as well as the current output.
PRINT - accesses optional line printer.
ALARM - acknowledges an alarm condition and silences optional
ACK
audible alarm
ENTER - records the existing entry in a data field in memory and either moves to the
next programmable data field on the page or moves to the next screen and
terminates the programming mode.
DELETE - erases an entry in an active field during programming
