K-Rain rps612 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 36

K-Rain rps612 Скачать руководство пользователя страница 16

14

MANUAL OPERATIONS

The controller will start running all stations with the selected run time. The time will

decrement in the display and will sequentially move through all stations, running them

for the same set period of time. This option is designed so that it is possible to test all

sprinklers and valves that make up the irrigation design.

To skip to the next station press the

button. To go back a station press the

button. To stop the system test, change the position of the main dial, to “OFF”.

HINT:

If you wish to alter the default value from 2 mins to some other value and

set this as the new default time, press the

and

together followed by

button. Then alter the run time using the

or

buttons. Once the new

default time is set press the

button again, and the new default will now always

appear when you select a “manual system test”.

Run a Program

To manually run a complete program or to stack multiple programs to run, rotate the

dial to “Run Program”. The word “OFF” will be flashing.
The display will show:
To enable program 1 to start press the

button.

The icon “OFF” will change to “ON”.

This program has now been enabled so that it can be

run. To make program 1 run, press the

button.

NOTE:

So long as there are run times in program 1 then program 1 will start and

water the stations associated with it.

MAC_RPS612_Instruction_Manual.indd 14

20/03/12 4:43 PM

«
...
14
15
16
17
18
...
»

Содержание rps612





































Отзывы:

Нет отзывов