background image

The manufacturer guarantees to the original purchaser
that any product supplied by the manufacturer will be free
from defects in material and workmanship for a period of
two years from the date of purchase. Any product found
to have defects in material or workmanship within the
warranty period shall be repaired or replaced by the 
manufacturer.

The manufacturer does not guarantee the use for a
particular purpose of its products and does not make any
guarantee, expressed or implied, other than the warranty
contained herein. The manufacturer shall not be liable 
for any loss from use of the product or incidental or 
consequential damages to other parts of any installation
of which this product is part.

The warranty shall not apply to any equipment which is
found to have been improperly installed, set up or used in
any way not in accordance with the instructions supplied
with this equipment, or to have been modified, repaired 
or altered in any way without the expressed consent of
the manufacturer. This warranty shall not apply to any
batteries or accessories used in the equipment covered
under this warranty or to any damage which may be
caused by such batteries. 

If the controller develops a fault, the product or main
panel must be returned in adequate packing with:

1. a copy of your original invoice;

2. a description of any fault; and

3. contact name and information.

It is the purchasers responsibility to return the controller
to the manufacture or their agent by prepaid freight.

WARRANTY

K-Rain Manufacturing Corp.

ATTN: WARRANTY
1640 Australian Avenue
Riviera Beach, FL 33404 
(561) 844-1002
(561) 842-9493 FAX
(800) 735-7246 / www.krain.com

© K-Rain Manufacturing Corp.
AN ISO 9001 CERTIFIED COMPANY                          26007201

Manufacturing Corporation

Modular Irrigation Sprinkler Controller

Hereby, K-Rain Manufacturing Corporation declares that this
irrigation controller Pro LC is in compliance with the essential
requirements and other provisions of Directive 1999/5/EC.

IP 24 Certified

Certificate of Conformity
to European Directives

Содержание PRO-LC





























Отзывы: