K-Rain PRO-LC, Инструкция по установке, программированию и эксплуатации

Страница: 22 / 28

www.krain.com
POWERING THE CONTROLLER
21
It is recommended that a licensed electrician
perform the following power installation.
All electrical connections and wiring must
be made according to local building codes.
Make sure all electrical power is turned off
before any wire connections are attempted.
For ease of installation the enclosure door
can be removed. Please refer to the installation
instructions on page 17 for door removal.
FOR OUTDOOR
CONTROLLER ONLY:
The hole located on
bottom left side of the
cabinet should be
used to bring AC power
wires and conduit into
the power junction box.
FOR INDOOR
CONTROLLER ONLY:
Pro-LC is powered with
either 115VAC or 220VAC
which must be noted
when ordering the unit.
Installation is easy.
Simply plug connector
from the controller with
the connector on the
end of the plug pack.
The Pro-LC controller is powered with either
115VAC or 220VAC which must be noted when
ordering the unit.
Connect the AC wires to the transformer wires
located inside the power junction box with wire
nuts or other locally approved connectors.
s
!
WARNING: Risk of explosion. Potential risk if
battery is replaced with an incorrect type.
The battery must be removed and disposed
of properly.