K-Line CropCommander Скачать руководство пользователя страница 7

Страница: 7 / 44

K-Line Ag

___________________________________________________________________

Page | 3

Safety Alert!!

Safety…You Can Live With It

SAFETY ALERT SYMBOL

When you see this symbol, you must be
alert to the possibility of

injury or death.

SIGNAL WORDS

The use of signal words

DANGER, WARNING

and

CAUTION

relating to the safety

messages. The appropriate Signal Word is selected using the following guidelines.

DANGER:

indicates an imminently

hazardous situation that, if not avoided,

WILL

result in serious injury or death if

proper safety measures are not taken.

WARNING:

Indicates a potentially

hazardous situation that, if not avoided

COULD

result in serious injury or death if

proper safety measures are not taken.

CAUTION:

Indicates a potentially

hazardous situation that, if not avoided

MAY

result in serious injury or death if

proper safety measures are not taken.

IT IS THE RESPONSIBILITY OF THE USER TO MAINTAIN IN AS NEW CONDITION
ALL SAFETY SIGNS AND DEVICES USED ON THIS MACHINE. FAILURE TO
OBSERVE THE INSTRUCTIONS OF THIS BOOKLET COULD RESULT IN SERIOUS
INJURY OR DEATH.

Be Familiar with Safety Decals



Read and thoroughly understand all
the

‘Safety Decals”

on (Pages 8 &

9) and throughout this manual.

Содержание CropCommander













































Результаты поиска

Содержание CropCommander

Отзывы:

Бренды по названию

Популярные бренды

K-Line CropCommander, Руководство по безопасности оператора

Результаты поиска

Содержание CropCommander

Отзывы:

Бренды по названию

Популярные бренды