K-Line CropCommander, Руководство по безопасности оператора

Страница: 14 / 44

K-Line Ag
©
___________________________________________________________________
Page | 10
Hitching and Un-hitching
1. Keep well clear when backing up to machine. (see
figure 5)
2. Shut down tractor.
3. Secure & lock drawbar pin in place.
4. Install safety chain by crossing the chains under the
tongue and secure to the drawbar hitch frame of the
tractor.
5. Clean all hydraulic couplings.
6. Hoses are coded according to function. (Page 11)
7. Beware of high pressure fluid. (see figure 6)
8. Release pressure from system before disconnecting.
9. Plug in hoses to respective remote ports.
10. Plug in electrical lead to tractor connection where
applicable
11. Release implement jack & store
12. Jack must be securely locked in place when
disconnecting.
If implement jack is damaged DO NOT USE,
replace immediately, or severe bodily harm may
result. See Figure 7.
13. Check hydraulic cylinders are fully primed to avoid
serious injury or death. (Page 22) for priming
hydraulic system
OIL under high pressure COULD result in
serious injury or death
Figure 8
Figure 6
Figure 5
Figure 7
S
a
fe
Op
e
ra
tion