K-FEE EXPRESSI, Руководство пользователя

Страница: 29 / 36

29
settings (see instructions p. 25) and then re-programme your individually required cup
filling capacity (see instructions p. 16).
Drink is not hot enough?
The heating element could be calcified. Descale the appliance in accordance with the
instructions on p. 22-24. If the problem continues to occur, please contact our service
centre.
Does the appliance need to be descaled even if a water filter is being used?
The use of a water filter increases the descaling intervals considerably, but it cannot
completely replace them. The appliance needs to be descaled regularly in any case
because mineral deposits can occur depending on your regional water hardness level
and the installation site. Your appliance has to be descaled when the rinsing button
illuminates red. If using a water filter, we recommend descaling the appliance yearly
with a
K-fee® – your system
approved liquid solution. More frequently depending on
water hardness in your local area.
What can be done if the lever cannot be closed completely after a capsule has
been inserted?
First, ensure that there are no more used capsules in the brewing chamber and that the
used capsule container has not been overfilled. Ensure that the new capsule you have
inserted is in the correct position.
What can be done if the used capsule container is overfilled and is
jamming?
Attempt to remove the capsule collecting container by shaking it slightly.
What is the purpose of automatic switch-off?
If not being used, the appliance switches off automatically - either after 5 minutes
(factory setting) or after a time you have pre-programmed using the "Automatic
switch-off" function - see instructions p. 17). This means that your
EXPRESSI
capsule machine uses considerably less energy: the appliance consumes considerably
less power (less than 0.5 W) than it does in operating mode.
During periods of absence and at the end of the brewing day, switch the applicance
off at power supply (240 V plug)