K-FEE EXPRESSI, Руководство пользователя

Страница: 28 / 36

28
Rinsing button blinks red and milk button blinks white at the same time?
The appliance could be overheated. Switch the appliance off, remove the mains plug
and allow the appliance to cool down. After this, insert the mains plug again and switch
the appliance on.
Rinsing button is illuminating red during drink preparation?
The appliance has to be descaled. Please read the instructions for this on p. 22-24.
Drink is not being prepared properly?
Check to ensure that the lever has been pressed down completely. If, despite this,
the error occurs again you should clean the appliance (see instructions p. 20/21:
Cleaning with cleaning fluid) and also descale it (see instructions p. 22-24). If the
water runs out during drink output: Interrupt drink preparation by pressing any
button. Open and close the lever to eject the capsule, remove the water tank, refill it
with fresh water and insert it in the appliance again. Place a collecting container under
the spout and rinse the appliance out until water flows out of the drinks spout.
Drink dispensing is delayed?
The appliance is heating up. Please be patient.
Liquid capacity during drink preparation is insufficient?
The system could be calcified. Descale the appliance in accordance with the instruc-
tions on p. 22-24. If the problem continues to occur, please check the cup filling
capacity you have programmed. If required, reset the appliance to the factory
SAFETY INFORMATION
The appliance only functions correctly
with drink capsules of any brand which are
labelled with the
K-fee® – your system
logo.
Use of non-original capsules can result in the fol-
lowing risks: health risks, damage to the appliance
and possible loss of warranty claims.
Frequently asked questions