8
2 Getting Started
This chapter describes proper installation environment, installation procedures, package
contents and basic information users should be aware of regarding the PXIe-69529.
Diagrams and illustrated equipment are for reference only.
Actual system configuration and specifications may vary.
2.1 Installation Environment
When unpacking and preparing to install, please refer to Important Safety Instructions.
Only install equipment in well-lit areas on flat, sturdy surfaces with access to basic tools
such as flat- and cross-head screwdrivers, preferably with magnetic heads as screws and
standoffs are small and easily misplaced.
Recommended Installation Tools
• Phillips (cross-head) screwdriver
• Flat-head screwdriver
• Anti-static wrist strap
• Antistatic mat
JYTEK PXIe-69529 DSA modules are electrostatically sensitive and can be easily damaged by
static electricity. The module must be handled on a grounded anti-static mat. The operator
must wear an anti-static wristband, grounded at the same point as the anti-static mat.
Inspect the carton and packaging for damage. Shipping and handling could cause damage to
the equipment inside. Make sure that the equipment and its associated components have
no damage before installation.
The equipment must be protected from static discharge and physical shock.
Never remove any of the socketed parts except at a static-free workstation. Use
the anti-static bag shipped with the product to handle the equipment and wear a
grounded wrist strap when servicing.
Package Contents
• PXIe-69529 dynamic signal acquisition module
If any of these items are missing or damaged, contact JYTEK.
Do not install or apply power to equipment that is damaged or missing
components. Retain the shipping carton and packing materials for inspection.
Please contact your JYTEK immediately for assistance and obtain authorization
before returning any product.
