manualshive.com logo in svg

JVC XV-BP1B, Руководство по обслуживанию

Поделиться
Скачать
JVC XV-BP1B Скачать руководство пользователя страница 94

 4-13

4. BAR-CODE SCAN PROCEDURE

  1) Untie the screw of Loader.
  2) Connect the “USB to SATA connector” and “SATA Power” to the Loader.
  3) Connect the “USB to SATA connector” to the PC.
  4) Connect the “Bar-Code Scanner” to the PC.
  5) Run the Bar-Code Scan Tool (Loader Tester).
  6) Click “Start” Button 

      

 (Tip. If Drive can not be detected, please plug off and on again the “USB to SATA connector” to the PC and 
wait for 15 seconds.)

  7) Sled will move the innermost.
 8) 

 

Focus on the target of Bar-Code and Pull the trigger of Bar-Code scanner until Bar-Code can be scanned 
to the Bar-Code scan Tool (Loader Tester)

  9) If Bar-Code scan succeeds, “ OK” will display in the result windows. 
      However, Bar-Code scan fails, “NG” will display in the result windows.
      In case you got “ NG” result, please check procedure up from 2 to 8. then try it again.

Содержание XV-BP1B














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды