JVC XL-R5020BK, Руководство по обслуживанию

Страница: 15 / 123

XL-R5020BK
15
3.1.5 Removing the flap base unit and the gear base unit
(See Fig.18 and 19)
*Prior to performing the following procedures, remove the servo
control board, the top cover, the tray unit,the side unit (L) and
the side unit (R).
(1) Remove the screw E attaching the flap base unit. Release
the joint tabs i and j , then remove the flap base unit from
the body.
(2) Remove the belts from the two pulleys on the gear base
unit.
(3) Remove the three screws F and remove the gear base unit
from the body.
Fig.18
Fig.19
3.1.6 Removing the motors
(See Fig.20)
*Prior to performing the following procedure, remove the main
board.
(1) Remove the belts from the two pulleys.
(2) Remove the four screws
G and detach each motor from
the body.
Fig.20