6
2 CONTROLS, CONNECTIONS AND DISPLAY
2-1 Front panel
1
[LITHIUM BATTERY] battery box for memory backup
Install a memory backup battery. When replacing the battery with
a new one, be sure to set the date/time again.
Reference:
“4-1 Installing a battery” on page 12.
2
[POWER] indicator
When the [POWER] switch is turned ON, this indicator lights.
3
[DISPLAY PANEL]
Shows the operation status or setting details.
Reference:
“2-3 Display” on page 8.
4
[TIMER] button
After programming the timer, press this button to engage the
Standby mode.
Reference:
“6-2 Program timer recording” on page 23.
5
[CANCEL] button
• When a line is selected on the [PROGRAM TIMER] or
[HOLIDAY SET] screen, press this button to clear it.
• When an alarm or warning occurs, press this button to stop the
buzzer.
Reference:
“6-2 Program timer recording” on page 26 and “6-4
Alarm recording” on page 28
6
[MENU] button
Press this button in the Stop mode to display the main menu
setting screen.
* The menu cannot be displayed when the
6
[TIMER] indicator
(see page 8) is on or during recording/playback.
7
[SEARCH] button
Press to display the search menu for alarm search or time/date
search. Pressing this button again restores the normal screen.
Reference:
“7-4 Alarm or day/time direct search” on page 35.
8
[DISPLAY] display panel switching button
Each time this button is pressed, the display changes in order from
CLOCK to DATE to REMAIN to REC QUALITY-REC SPEED.
• Press [DISPLAY] button in any mode except Record for about 2
seconds. The recording setting display is displayed, allowing
you to set recording quality/number of frames.
9
Jog dial
In the Play or Still mode, use this dial for frame-by-frame
playback.
Reference:
“7-2 Jog/shuttle playback” on page 32.
With the menu/search screen, use this dial to set the item or
value.
Reference:
“Jog/shuttle dial operation” on page 16.
0
Shuttle search dial
Turn to vary the playback speed in the Play or Still mode.
Reference:
“7-2 Jog/shuttle playback” on page 32.
With the menu/search screen, use this dial to set the item or
value.
Reference:
“Jog/shuttle dial operation” on page 16.
!
[REC] indicator
Lights when recording on the hard disk.
Blinks during alarm/sensor recording.
Goes out during recording if you set <REC TALLY> of <FRONT
DISPLAY> to “OFF”.
Reference:
“5-3 Menu switch details” on page 19.
@
[CLOCK RESET/CLEAR] button
In the Stop mode, press this button together with the [STOP]
button to reset the second value on the internal clock.
• With 29 seconds or less, the minute value stays the same and
the second value is reset to 00.
• With 30 seconds or more, the minute value is increased by 1
and the second value is reset to 00.
Pressing this button stops recording during alarm/sensor
recording.
When the alarm list screen or power-off list screen is displayed,
pressing this button clears the list.
Reference:
“7-4 Alarm or day/time direct search” on page 35.
Use this button to cancel the [AUTO SCAN DISK] function.
Reference:
“8-1 Hard disk maintenance” on page 36.
#
[OPE.LOCK] operation lock key
Set to “ON” position with the provided key to lock switch
operation.
Security levels can be selected with menu switch <OPERATION
LOCK MODE>.
●
ALL:
Locks all switches.
●
REC STOP:
Prevents recording from being stopped when the
&
[STOP] button is pressed.
* Set to “ALL” for timer recording.
Reference:
“5-3 Menu switch details” on page 19.
$
[SKIP/ALARM SEARCH·EXECUTE] SKIP SEARCH·EXECUTE
button
Skip search
In the Stop mode, press this button to go to the start or end of a
recording of the hard disk.
In the Play mode, press this button to start skip search.
There are three types of skip search:
●
Time search:
Goes to the point a specified time from the
current point.
●
Event search:
Goes to the start of an event recording.
●
Alarm search:
Goes to the start of an alarm recording.
Reference:
“7-3 Skip search” on page 33
EXECUTE button
Use this button to execute alarm direct search, day/time direct
search or “disk scan”/ “quick format”.
Reference:
“7-4 Alarm or day/time direct search” on page 35 and
“8-1 Hard disk maintenance” on page 36
%
[STILL] button
In the Play mode, press this button to engage the Still mode.
^
[PLAY] button
Press this button to start playback.
●
I
n the Stop mode:
Playback starts at the position where
playback was last stopped.
* Just after the power is turned ON, playback starts from a point
about 5 seconds before the end point of the last recording.
●
In the Record mode:
Simultaneous Playback mode is
engaged.
Reference:
“Simultaneous Playback mode” on page 31.
7
8
POWER
WARNING
SLEEP
REC
STOP
PLAY
STILL
TIMER
CANCEL
DISPLAY
MENU
SEARCH
SELECT
REV
FWD
EXECUTE
SKIP/ALARM
SEARCH
REC
CLOCK RESET/ CLEAR
OPE. LOCK
ON
DIGITAL VIDEO RECORDER VR-510U
12
9
10
11
4
5
6
13
15
16
17
18
19
20
14
1
2
3
* Behind
the cover
