JVC VR-510U Скачать руководство пользователя страница 39

Страница: 39 / 52

Problem

No power is supplied.

Operation buttons such
as [REC] and [PLAY] do
not respond when
pressed.

No picture is shown
during playback.

Timer recording is not
possible.

The menu screen can’t
be displayed.

The date/time is not
shown on screen.

The date/time is not
recorded.

The timer indication
blinks.

Recording/playback is
not possible.

No sound in playback.

Skip search or direct
search is not possible.

Cause

●

The power cord may be disconnected.

●

The Operation Lock mode may be
engaged.

●

The monitor may not be properly
connected.

●

The selected camera may not be
transmitting a signal.

●

The clock may not be set.

●

The Timer Standby Mode may have
been turned off. Is the [TIMER]
indication lit?

●

The timer program may not be set
correctly.

●

The Timer Standby Mode may be
engaged. Is the [TIMER] indication lit?

●

The Record, Play or Simultaneous Play
mode may be engaged.

●

<ON SCREEN MODE> may be set to
“OFF”.

●

The clock may not be set.

●

Menu switch <TIME DATE REC> may
be set to “OFF”.

●

The timer is not programmed or a set
program cannot be executed.

●

There may not be enough space
available on the hard disk.

●

Cameras may not be connected in
sync.

●

<AUDIO REC> may not be “ON”.

●

The clock may not be set correctly.

Possible solution

●

Connect the provided power cord to a
120 V AC outlet.

●

Release the Operation Lock mode.

●

Connect the monitor correctly.

●

Select the camera for recording.

●

Check the clock setting.

●

Press the [TIMER] button to engage the
Timer Recording Standby mode.

●

Check the timer program settings. The
[TIMER] indication blinks if a program
cannot be executed.

●

Press the [TIMER] button to release the
timer program.

●

Stop the operation, then press the
[MENU] button.

●

Set <ON SCREEN MODE> to “ON”.

●

Set the clock.

●

Set menu switch <TIME DATE REC> to
“ON”.

●

Re-set the program timer.

●

Re-format the hard disk to clear existing
data.

●

Input the signals in sync.

●

Set <AUDIO REC> to “ON”.

If <REC SPEED> is set to “1/5” or “1/

10”, audio signals cannot be recorded.

●

Set the clock.

Page
reference

23 – 25,

9-2 No error indication

TROUBLESHOOTING (contd.)

Содержание VR-510U





















































Результаты поиска

Содержание VR-510U

Отзывы:

JVC VR-510U, Инструкция по эксплуатации, Страница: 39 / 52

Результаты поиска

Содержание VR-510U

Отзывы: