21
Setting item
Menu switch
Setting value
Description
ALARM/
REC MODE
[OFF]
Sets the alarm or sensor recording.
SENSOR MODE
ALARM
OFF
: Does not execute alarm/sensor recording.
SENSOR
ALARM
: Executes alarm recording.
SENSOR : Executes sensor recording.
Reference:
“6-4 Alarm recording” on page 28 and “6-5 Sensor
recording” on page 29.
REC DURATION
10 SEC
Selects the recording duration when an alarm or sensor signal
15 SEC
is input.
30 SEC
10 SEC : Executes alarm/sensor recording for 10 sec.
60 SEC
15 SEC : Executes alarm/sensor recording for 15 sec.
120 SEC
30 SEC : Executes alarm/sensor recording for 30 sec.
[180 SEC]
60 SEC : Executes alarm/sensor recording for 60 sec.
MANUAL
120 SEC : Executes alarm/sensor recording for 120 sec.
180 SEC : Executes alarm/sensor recording for 180 sec.
MANUAL: Executes alarm recording for as long as an alarm
signal is input.
*Recording continues about 5 seconds after the set duration
has passed.
(<AL/SENS DET MARK> is also shown.)
PRESENSOR REC
[OFF]
Sets whether or not pre-sensor recording is executed.
ON
To execute pre-sensor recording, set this switch to “ON”.
Reference:
“Pre-sensor recording” on page 29.
PRESENSOR REC
[10 SEC]
Selects the recording duration when menu switch
DURATION
30 SEC
<PRESENSOR REC> is set to “ON”.
60 SEC
Reference:
“Pre-sensor recording” on page 29.
BUZZER
HDD END
[OFF]
Sets whether or not the buzzer sounds when the hard disk is
ON
full (during recording).
OFF: The HDD end buzzer does not sound.
ON : The buzzer sounds.
ALARM/SENSOR
[OFF]
Sets whether or not the buzzer sounds during alarm/sensor
ON
recording.
OFF: The buzzer does not sound.
ON : The buzzer sounds.
WARNING
[OFF]
Sets whether or not the buzzer sounds when a warning occurs.
ON
OFF: The buzzer does not sound.
ON : The buzzer sounds.
UTILITY
AUTO SCANDISK
[OFF]
Sets whether or not the disk is scanned when the power is
ON
turned ON.
OFF: Disk is not scanned.
*The disk is not scanned unless the Record mode is engaged
before the power is turned OFF.
ON : Scans the disk when the power is turned ON.
Reference:
“8-1 Hard disk maintenance” on page 36.
MANUAL SCAN
[OFF]
When this switch is set to “ON” and the [SKIP
DISK
ON
SEARCH·EXECUTE] button is pressed, the disk is scanned.
Reference:
“8-1 Hard disk maintenance” on page 36.
QUICK ERASE
[OFF]
Selects whether the hard disk is formatted with standard or
STD
extended mode.
EXTN
When the disk is formatted, all existing data on the hard disk
will be erased.
OFF
: Does not format.
STD
: Normally, use this position. Up to 13,000 alarm/
sensor events can be recorded.
EXTN : Set to this position if you want to be able to record
more than 13,000 alarm/sensor events (up to about
100,000 events).
* Extended formatting takes about 5 minutes to complete.
Recording time is shorter than with the standard format.
Reference:
“8-1 Hard disk maintenance” on page 37.
5
ON-SCREEN DISPLAY/MENU SWITCHES (contd.)
5-3 Menu switch details
(contd.)
