JVC UX-L36V Скачать руководство пользователя | Manualshive

Страница: 3 / 89

background image

1-3

UX-L46V/UX-L36V

Preventing static electricity

1.Grounding to prevent damage by static electricity

Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged,
can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.

2.About the earth processing for the destruction prevention by static electricity

Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as CD players.
Be careful to use proper grounding in the area where repairs are being performed.

2-1 Ground the workbench

Ground the workbench by laying conductive material (such as a conductive sheet) or an iron plate over
it before placing the traverse unit (optical pickup) on it.

2-2 Ground yourself

Use an anti-static wrist strap to release any static electricity built up in your body.

3. Handling the optical pickup

1. In order to maintain quality during transport and before installation, both sides of the laser diode on the
replacement optical pickup are shorted. After replacement, return the shorted parts to their original condition.
(Refer to the text.)

2. Do not use a tester to check the condition of the laser diode in the optical pickup. The tester's internal power
source can easily destroy the laser diode.

4.Handling the traverse unit (optical pickup)

1. Do not subject the traverse unit (optical pickup) to strong shocks, as it is a sensitive, complex unit.

2. Cut off the shorted part of the flexible cable using nippers, etc. after replacing the optical pickup. For specific
details, refer to the replacement procedure in the text. Remove the anti-static pin when replacing the traverse
unit. Be careful not to take too long a time when attaching it to the connector.

3. Handle the flexible cable carefully as it may break when subjected to strong force.

4. It is not possible to adjust the semi-fixed resistor that adjusts the laser power. Do not turn it

Attention when traverse unit is decomposed

1.Solder is put up before the card wire is removed from connector on
the CD substrate as shown in Figure.
(When the wire is removed without putting up solder, the CD pick-up
assembly might destroy.)
2.Please remove solder after connecting the card wire with
when you install picking up in the substrate.

*Please refer to "Disassembly method" in the text for pick-up and how to
detach the substrate.

(caption)
Anti-static wrist strap

Conductive material
(conductive sheet) or iron plate

CD pickup

Pickup board

Shorting round

(Soldering)

«
1
2
3
4
5
...
»

Содержание UX-L36V


























































































Отзывы:

Нет отзывов

Похожие инструкции для UX-L36V

Бренд: Tannoy Страницы: 10

Бренд: jablotron Страницы: 8

Бренд: OWI Страницы: 1

Бренд: Aaron Страницы: 1

Бренд: golmar Страницы: 12

Бренд: Uniden Страницы: 66

Ghost Beat SY-1245

Бренд: Sytech Страницы: 5

Бренд: XtendLan Страницы: 22

Бренд: ATUNE ANALOG Страницы: 19

Бренд: CALECTRO Страницы: 4

STRATA_HEAT 120V

Бренд: LATICRETE Страницы: 12

Бренд: JBL Страницы: 65

Бренд: FältCom Страницы: 41

Бренд: Lithe Audio Страницы: 16

CONTROL XSTREAM

Бренд: JBL Страницы: 72

MegaWorks THX 5.1 550

Бренд: Creative Страницы: 2

Бренд: Changyue Electronic Страницы: 5

Бренд: Telwin Страницы: 196

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды