1-16
UX-L46V/UX-L36V
Remove the two screws
B
attaching the video board
assembly and the CD servo board at the bottom of
the CD mechanism assembly.
Disconnect the card wire from connector CN101 on
the video board assembly.
Move the video board assembly forward to release
the joint
a
, and remove.
1.
2.
Disconnect the card wire from connector CN606 on
the CD servo board. Turn over the CD servo board
as shown in Fig.3 and put aside temporarily.
Solder the shorting round on the pickup board in the
CD pickup section.
Disconnect the card wire from connector CN601 and
the wire from CN801 on the CD servo board.
3.
4.
5.
Removing the CD servo board
(See Fig.3~5)
Solder the shorting round before disconnecting
the card wire extending from the pickup. If
you do not follow this instruction, the pickup
may be damaged.
CAUTION:
When reassembling, make sure to unsolder
the shorting round after connecting the card
wire from the pickup to the connector.
CAUTION:
The video board assembly can be
removed solely. To remove the video
board, see Fig.1 and 2.
REFERENCE:
Fig.5
CD servo board
CN601
CN801
CD pickup
CD pickup
Pickup board
Shorting round
Shorting round
(Soldering)
Fig.4
CD servo board
CN801
CN606
CN652
CN651
CN601
Fig.3
B
Video
board assembly
Joint a
CN101
Содержание UX-L36V
Страница 47: ...1 47 UX L46V UX L36V M E M O ...
Страница 66: ...UX L46V UX L36V ...
Страница 68: ...3 2 UX L46V UX L36V M E M O ...
Страница 87: ...3 21 UX L46V UX L36V M E M O ...