12
Audio input(Aux)Connection
1. Use a 3.5mm to 3.5mm audio cable (not included) to connect the PC, tablet, smartphone, TV’s headphone
socket to the AUX socket on the soundbar.
Use a RCA to 3.5mm audio cable (included) to connect the Blue Ray DVD Player / TV’s audio output sockets to
the AUX socket on the soundbar.
2. Use either the POWER/STANDBY button on the SoundBar or the "INPUT" button on the remote to activate
AUX mode. A green LED indicator will indicate that AUX mode has been selected.
3. Playback functions (play/pause, tracks, pair) cannot be adjusted through the SoundBar remote when in
AUX mode.Others playback functions can be controlled from the buttons on the SoundBar. In this mode, playback
can only be controlled on your connected device
5. The remote controller includes Bluetooth mode playback controls. Press and hold PAIR button on the remote
controller more than two seconds to disconnect paired Bluetooth device or connect back last disconnected
Bluetooth device.
6. If you wish, you can change the audio settings by using the relevant buttons on the remote controller.
.
Notes:
1. In Bluetooth mode, the remote can control music play/pause or select previous or next track. PREV/NEXT/
PLAY & PAUSE button only work in Bluetooth mode; they have no function in other modes.
2. The above pairing procedure doesn’t need to be repeated with the same connected device once paired.
3. If the connected device is switched off or manually disconnected, the sound bar will automatically enter
pairing mode.
4. If the connected device is moved away from wireless range (up to 10 meters) of the sound bar, then it will
get disconnected, and it will successfully connect to the device once you re-enter Bluetooth range.
To connect to other devices, repeat the above pairing steps.
5. If a Bluetooth device has been connected before, the sound bar will connect to the last connected device.
Unpair this connection to connect a new device.
6. There is no automatic shutdown in pairing mode. The sound bar will remain in pairing mode even if no device
is paired, so switch it off if not in use.
