JVC RX-DV31 страница 20 Скачать руководство пользователя

Страница: 20 / 80

English

DGTL AUTO

Select for the digital input mode.
The DIGITAL AUTO indicator lights up.
The unit automatically detects the
incoming signal format, then the sound
signal indicator for the detected signal
(see below) lights up; otherwise, no
sound signal indicators light up.

ANALOG

Select for the analog input mode (initial
setting except for the built-in DVD
player).
The ANALOG indicator lights up.

Sound signal indicators on the display

PPCM

Light when DVD AUDIO Packed PCM signals
come in.

DIGITAL

• Light when Dolby Digital signals come in.
• Flash when “DGTL D.D.” is selected for

software not encoded with Dolby Digital
signals.

• Light when DTS signals come in.
• Flash when “DGTL DTS” is selected for

software not encoded with DTS signals.

LPCM

Light when Linear PCM signals come in.

Changing the digital input mode
manually—for DVD VIDEO only

If the following symptoms occur while Dolby Digital or DTS
software is played back, try changing the digital input mode:
• Sound does not come out at the beginning of playback.
• Noise comes out while searching for or skipping chapters

or tracks.

Press INPUT ANALOG/DIGITAL (INPUT ATT.)
on the front panel or ANALOG/DIGITAL
INPUT on the remote control to select
“DGTL AUTO.”

On the front panel

From the remote control

Press CONTROL

(or

) to

select “DGTL D.D.” or “DGTL
DTS” while “DGTL AUTO” still
remains on the display.

• Each time you press the button, the digital input mode

changes as follows:

DGTL D.D.

Select for playing back software
encoded with Dolby Digital.
The

DIGITAL

indicator lights up

DGTL DTS

Select for playing back software
encoded with DTS.
The

indicator lights up

These indicators flash when no signal or a signal
without the proper format is played back.

You can also change the digital input mode by
pressing DECODE repeatedly on the remote
control.

Notes:

• When “DGTL AUTO” cannot recognize the incoming signals, no

sound signal indicators light up on the display.

• When you turn off the unit or select another source, “DGTL DTS”

and “DGTL D.D.” are canceled.
The digital input mode is automatically reset to “DGTL AUTO.”

Attenuating the Input Signal

When the input level of the analog source is too high, the
sounds will be distorted. If this happens, attenuate the input
signal level to prevent this sound distortion.
• You have to make this adjustment for each analog source.

On the front panel ONLY

Press and hold INPUT ATT. (INPUT ANALOG/DIGITAL)
until the INPUT ATT indicator lights up on the display.

• Each time you press and hold the button, the Input

Attenuator turns on (“ATT ON”) or off (“ATT NORMAL”).

INPUT ATT indicator

ATT NORMAL

Normally select this (initial setting).
The analog sound is not attenuated.

ATT ON

Select when the analog sound is distorted.

Basic Operations

MPEG-2 AAC

TA NEWS INFO