manualshive.com logo in svg

JVC RX-D701S, Инструкция по эксплуатации

На нашем сайте вы можете бесплатно скачать инструкцию к JVC RX-D701S. Пользуйтесь руководством для настройки и использования аппарата. Загрузите manualshive.com и начните использовать ваш продукт с максимальной эффективностью.

Поделиться
Скачать
background image

30

Selecting the main or sub channel
—DUAL MONO

You can select the playback sound (channel) you want while
playing digital software recorded (or broadcasted) in Dual Mono
mode (see page 42), which includes two monaural channels
separately. When the receiver detects Dual mono signals, the
DUAL MONO indicator lights up on the display.

DUAL MONO: MAIN

Select to play back the main channel (Ch 1).*
Signal indicator “L” lights up while playing
back this channel.

DUAL MONO: SUB

Select to play back the sub-channel (Ch 2).*
Signal indicator “R” lights up while playing
back this channel.

DUAL MONO: ALL

Select to play back both the main and sub-
channels (Ch 1/Ch 2).*
Signal indicators “L” and “R” light up while
playing back these channels.

Initial setting: 

DUAL MONO: MAIN

* Dual Mono signals can be heard from the following speakers—L

(left front speaker), R (right front speaker), and C (center
speaker), with respect to the current Surround setting:

NOTE

The Dual Mono format is not identical with bilingual broadcasting
for TV programs. So this setting does not take effect while
watching such bilingual programs.

Setting bass sound

7

 Setting subwoofer output—SUBWFR OUT

The subwoofer emits the LFE signals* and the bass elements of
each speaker set to “SMALL.”
You can make the bass elements of the front speaker channels
(MAIN) emitted through the subwoofer.

SUBWFR OUT: LFE

Select to emit the LFE signals and
the bass elements of each speaker
set to “SML.”

SUBWFR OUT: LFE+MAIN

Select to emit the bass elements of
the front speakers’ channels (MAIN)
when no bass elements are emitted
through the subwoofer in “SW: LFE.”

Initial setting: 

SUBWFR OUT: LFE

NOTE

When “SUBWOOFER” is set to “SUBWOOFER: NO” (see page
28), this function is not available.
* The LFE signals are emitted only when playing the following

software with the LFE signals:
– Dolby Digital multi channel software
– DTS multi channel software
When playing analog source or linear PCM software, no LFE
signals are emitted.

Activating the EX/ES/PLIIx setting—EX/ES/
PLIIx

Depending on this setting, available Surround modes for digital
multi-channel software vary—EX/ES/PLIIx reproduction or 5.1-
channel reproduction. Select an appropriate setting for your
enjoyment.
• For details about relation between EX/ES/PLIIx setting and

available Surround mode, see page 44.

• To activate the Surround mode, see page 45.

EX/ES/PLIIx: AUTO

According to the incoming signal, an appropriate
Surround mode is applied.
• For Dolby Digital Surround EX and DTS-ES

software, 7.1-channel reproduction is applied*.

• For the other multi-channel (more than 4

channel) encoded software, 5.1-channel
reproduction is applied.

EX/ES/PLIIx: ON

Select to apply 7.1-channel reproduction to both
5.1-channel and 6.1-channel encoded software.

EX/ES/PLIIx: PLIIx MOVIE

Select to apply PLIIx MOVIE reproduction to
both 5.1-channel and 6.1-channel encoded
software.

EX/ES/PLIIx: PLIIx MUSIC

Select to apply PLIIx MUSIC reproduction to
both 5.1-channel and 6.1-channel encoded
software.

EX/ES/PLIIx: OFF

Select to cancel the EX/ES/PLIIx reproduction.

Initial setting: 

EX/ES/PLIIx: AUTO

* For some Dolby Digital Surround EX software, Dolby Digital 5.1-

channel reproduction (“DOLBY DIGITAL”) may be applied even
though you have selected “AUTO”. In this case, select “ON”

 

to

apply

 

“DOLBY D EX.” (See page 44.)

NOTES

• This function is not available when “SURR SPK” is set to “NO”

(see page 28).

• When “S BACK SPK” is set to “NO” (see page 28), the Virtual

Surround Back (see page 44) is applied for EX/ES/PLIIx
reproduction and the VIRTUAL SB indicator lights up on the
display.

Dual Mono 

setting

Ch 1

Ch 2

Ch 1

Ch 2

Ch 1

Ch 1

ALL

Ch 1

Ch 2

Ch 1+Ch 2

Ch 1+Ch 2 Ch 1+Ch 2

Ch1

Ch 2

Ch 2

Ch 2

L

R

L

R

C

L

R

MAIN

SUB

Without 

Surround

With Surround Activated

Center speaker setting

SML/LRG

NO

23-32RX-D702B[J]_f.p65

05.8.25, 1:01 PM

30

Содержание RX-D701S











































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RX-D701S

NAD 4155 Instructions For Installation And Operation Manual preview
4155
Бренд: NAD Страницы: 14
Offshore 5801 User Manual preview
5801
Бренд: Offshore Страницы: 14
Zinwell Freeview ZMX-7500 Tuning Manual preview
Freeview ZMX-7500
Бренд: Zinwell Страницы: 13
Yamaha RX-V485 Owner'S Manual preview
RX-V485
Бренд: Yamaha Страницы: 155
Yaesu FR-40R Instruction Manual preview
FR-40R
Бренд: Yaesu Страницы: 17
Boss RDS610C User Manual preview
RDS610C
Бренд: Boss Страницы: 17
CMOSTEK CMT216 Series Operating Manual preview
CMT216 Series
Бренд: CMOSTEK Страницы: 32
Boss Audio Systems 639UA User Manual preview
639UA
Бренд: Boss Audio Systems Страницы: 9
VISTEON MB-8000 Operating Manual preview
MB-8000
Бренд: VISTEON Страницы: 15
Ross HDT2-5101 User Manual preview
HDT2-5101
Бренд: Ross Страницы: 36
Xtrons DL300 User Manual preview
DL300
Бренд: Xtrons Страницы: 12
ADEMCO 7845CZ Installation And Setup Manual preview
7845CZ
Бренд: ADEMCO Страницы: 64
Questtel L-2SDI-FE-HD-TX User Manual preview
L-2SDI-FE-HD-TX
Бренд: Questtel Страницы: 13
Nav TV NTV-KIT585 User Manual preview
NTV-KIT585
Бренд: Nav TV Страницы: 22
Orava RR-19A Instruction Manual preview
RR-19A
Бренд: Orava Страницы: 14
Sommerkamp TS 288A Instruction Manual preview
TS 288A
Бренд: Sommerkamp Страницы: 25
Cobra MR HH500 FLT BT Manual preview
MR HH500 FLT BT
Бренд: Cobra Страницы: 2
Cobra MR HH325VP Service Manual preview
MR HH325VP
Бренд: Cobra Страницы: 51

Бренды по названию

Популярные бренды

Загрузить еще бренды