JVC RX-D701S Скачать руководство пользователя страница 2

Страница: 2 / 234

RX-D701S

Warnings, Cautions, and Others

Caution––

STANDBY/ON button!

Disconnect the mains plug to shut the power off completely.
The

STANDBY/ON button in any position does not disconnect

the mains line. The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspa-
per or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted

candles, on the apparatus.

• When discarding batteries, environmental problems must

be considered and local rules or laws governing the
disposal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids such as
vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage.
Locate the apparatus as follows:
Front:

No obstructions open spacing.

Sides:

No obstructions in 15 cm from the sides.

Top:

No obstructions in 15 cm from the top.

Back:

No obstructions in 15 cm from the back.

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Spacing 15 cm or more

Wall or
obstructions

Stand height 15 cm or more

Floor

Front

safety_RX-D701S[A]_f.p65

05.11.1, 1:27 PM

Содержание RX-D701S











































































































































































































































Результаты поиска

Содержание RX-D701S

Отзывы:

Похожие инструкции для RX-D701S

Бренды по названию

Популярные бренды

JVC RX-D701S, Инструкция по эксплуатации

Результаты поиска

Содержание RX-D701S

Отзывы:

Похожие инструкции для RX-D701S

Бренды по названию

Популярные бренды