manualshive.com logo in svg

JVC RX-D701S, Инструкция по эксплуатации

На нашем сайте вы можете бесплатно скачать инструкцию к JVC RX-D701S. Пользуйтесь руководством для настройки и использования аппарата. Загрузите manualshive.com и начните использовать ваш продукт с максимальной эффективностью.

Поделиться
Скачать
background image

43

Introducing the DSP modes

The sound heard in a concert hall, club, etc. consists of direct
sound and indirect sound—early reflections and reflections from
behind. Direct sounds reach the listener directly without any
reflection. On the other hand, indirect sounds are delayed by the
distances of the ceiling and walls. These direct sounds and
indirect sounds are the most important elements of the acoustic
surround effects.
The DSP modes can create these important elements, and give
you a real “being there” feeling.

The DSP modes include the following modes:
• Digital Acoustic Processor (DAP) modes—HALL1, HALL2, LIVE

CLUB, DANCE CLUB, PAVILION, THEATER1, THEATER2

• MONO FILM—Used for all types of 2-channel signals (including

Dual Mono signal)

• All Channel Stereo mode (ALL CH STEREO)

When one of the DSP modes is activated, the DSP indicator lights
up on the display.

■

 Digital Acoustic Processor (DAP) modes

You can use the following DAP modes in order to reproduce a
more acoustic sound field in your listening room.

HALL1

Reproduces the spatial feeling of a large
shoebox-shaped hall designed primarily for
classical concerts. (Its seating capacity is about
2000.)

HALL2

Reproduces the spatial feeling of a large
vineyard-shaped hall designed primarily for
classical concerts. (Its seating capacity is about
2000.)

LIVE CLUB

Reproduces the spatial feeling of a live music club
with a low ceiling.

DANCE CLUB

Reproduces the spatial feeling of a rocking dance
club.

PAVILION

Reproduces the spatial feeling of an exhibition
hall with a high ceiling.

THEATER1

Reproduces the spatial feeling of a large theater
where the seating capacity is about 600.

THEATER2

Reproduces the spatial feeling of a small theater
where the seating capacity is about 300.

NOTE

When “THEATER1” or “THEATER2” is activated while playing
back 2-channel analog or digital source, the built-in Dolby Pro
Logic II decoder is activated and the 

 indicator lights up.

Early reflections

Direct sounds

Reflections from behind

When using the DAP mode, the sounds come out of all the
connected and activated speakers.

• If “SURROUND SPK” is set to “NO” in the speaker setting

(see page 28), 

JVC’s original 3D-PHONIC processing (which

has been developed to create the surround effect through the
front speakers only) is used.
The 3D-PHONIC indicator lights up on the display.

■

 MONO FILM

In order to reproduce a more acoustic sound field in your listening
room while viewing monaural sound video software (analog and
2-channel digital signals including Dual Mono signal), you can use
this mode.
The surround effect will be added, and the sound localization of
actor’s words will be improved.

This mode cannot be used for multi-channel digital signals.

When “MONO FILM” is used, sounds come out of all the
connected (and activated) speakers.
•

If “SURROUND SPK” is set to “NO” in the speaker setting
(see page 28), 

JVC’s original 3D-PHONIC processing (which

has been developed to create the surround effect through the
front speakers only) is used.
The 3D-PHONIC indicator lights up on the display.

• If incoming signals change from 2-channel digital signal to

another digital signal type, “MONO FILM” is canceled and an
appropriate Surround mode is activated.

■

 All Channel Stereo mode (ALL CH STEREO)

This mode can reproduce a larger stereo sound field using all the
connected (and activated) speakers. 

This mode cannot be used

if “SURROUND SPK” is set to “NO” in the speaker setting
(see page 28).

Sound reproduced from
normal stereo

Sound reproduced from All
Channel Stereo mode

3D HEADPHONE mode

If you connect a pair of headphones while one of the
Surround/DSP modes is in use, the 3D HEADPHONE mode is
activated without respect to the type of software played back.
“3D HEADPHONE” appears on the display and the DSP and
HEADPHONE indicators light up.

41-45RX-D702B[J]_f.p65

05.8.25, 1:05 PM

43

Содержание RX-D701S











































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для RX-D701S

Sansui R-5 Operating Instructions Manual preview
R-5
Бренд: Sansui Страницы: 12
Yaesu FT-2900R Technical Supplement preview
FT-2900R
Бренд: Yaesu Страницы: 34
Yaesu FT-250R Technical Supplement preview
FT-250R
Бренд: Yaesu Страницы: 33
Yaesu FTDX101D Service Manual preview
FTDX101D
Бренд: Yaesu Страницы: 13
Yaesu FT-2500M Operating Manual preview
FT-2500M
Бренд: Yaesu Страницы: 56
Yaesu FT-2500M Instruction Manual preview
FT-2500M
Бренд: Yaesu Страницы: 54
Yaesu FT-209R Technical Supplement preview
FT-209R
Бренд: Yaesu Страницы: 39
Yaesu FT-1900R Operating Manual preview
FT-1900R
Бренд: Yaesu Страницы: 90
Yaesu FT-60R Quick Manual preview
FT-60R
Бренд: Yaesu Страницы: 22
Yaesu VR-120D Brochure & Specs preview
VR-120D
Бренд: Yaesu Страницы: 2
Yaesu VR-120 Brochure preview
VR-120
Бренд: Yaesu Страницы: 2
Yaesu FT-450 Brochure & Specs preview
FT-450
Бренд: Yaesu Страницы: 2
Yaesu FT-101ZD User Manual preview
FT-101ZD
Бренд: Yaesu Страницы: 60
Yaesu FT-101ZD Service Manual preview
FT-101ZD
Бренд: Yaesu Страницы: 193
Yaesu FT DX 1200 Operation Manual preview
FT DX 1200
Бренд: Yaesu Страницы: 140
Yaesu VR-500 Operating Manual preview
VR-500
Бренд: Yaesu Страницы: 47
a-them AVM 60 Operating Manual preview
AVM 60
Бренд: a-them Страницы: 66
RocketFish RF-WHD210 (French) Manual D'Installation Rapide preview
RF-WHD210
Бренд: RocketFish Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды