JVC MC-8100U, Руководство по обслуживанию, Страница: 51 / 100

MC-8100U
2.2.4 Packing Mode
(1) Purpose:
For shipping the library’s main unit, the carrier mechanism is moved to the fixing position located at the lower end of the unit and
the drive is clamped.
(2) Activation:
· While pressing the the key “1” on the 10-key pad, turn the power ON.
(3) Operation: (when Drives 1 and 2 are connected)
1
Performs carrier initial operation.
2
Checks whether the tray is left in the mail slot or not. If the tray is left, it is returned to the magazine.
3
Checks whether the tray is left in the drive 1 or not. If the tray is left, it is returned to the magazine.
4
Checks whether the tray is left in the drive 2 or not. If the tray is left, it is returned to the magazine. (The same operation is
performed when drives 3 to 4 are installed.)
5
When the printer is connected, the unit also checks whether the tray is left in the printer or not. And if the tray is left, it is
returned to the magazine.
6
Moves the carrier mechanism to the shipping position.
7
Performs clamping operation for the drive 1 & 2.
8
Operation completed.
(4) Others
• “PACKING MODE” appears on the LCD display.
• Carrier stop position: Set at the point 100-pulse (approx. 15.6 mm) lower than the position where the lower limit sensor is turned
from ON to OFF.
• When the remaining tray detection is performed with the printer connected, and if the remaining tray is found, the tray is returned
to the magazine.
• When the tray remains in the printer, or when the printer-in tray memory remains in the CD/DVD Library, the tray in the printer will
be returned after the printer initializing operation is completed. For this reason, the printer power must be turned ON.
2.2.5 Tray Auto Return Mode
(1) Purpose:
Performs the operation to return the tray which is left in the drive, the mail slot or optional printer.
(2) Activation:
While pressing the key “2” on the 10-key pad, turn the power ON.
(3) Operation:
1
Performs carrier initial operation.
2
Check whether the tray is left in the drive 1 or not. If the tray is left in, it is returned to the memorized magazine.
3
The same operation as
2
is performed for drives 2 to 4 respectively.
4
Checks whether the tray is left in the mail slot or not. If the tray is left in, it is returned to the memorized magazine.
5
When the printer is connected, the unit also checks whether the tray is left in the printer or not. And if the tray is left in, it is
returned to the magazine.
6
Operation completed.
2-14
2.2.6 Memory Clear Mode
(1) Purpose:
Clears the backup memory for the mechanism CPU and SCSI CPU, including to reset the disc/tray mapping data and SCSI ID of the
main unit, etc.
(2) Activation:
While pressing the key “3” on the 10-key pad, turn the power ON.
(3) Operation:
1
Performs the tray auto return mode operation.
2
Clears the backup memory for the mechanism CPU and SCSI CPU.
* Be sure not to turn the power OFF until the mechanism operation is completed because the memory is cleared after the trays
left in the drive/mail slot are returned.
(Note) Trouble history and access counter will not be cleared.