JVC MC-8100U, Руководство по обслуживанию, Страница: 40 / 100

MC-8100U
Removing the C-Panel (Printer Panel)
<In normal condition>
When the power of the main unit is OFF, first turn it to ON.
In most cases, the panel of the printer storage section is not
locked. However, depending on the operation when the power
is turned OFF, the carrier may be located in the lower section.
In this case, since the panel is locked for protection, perform
the operation in the same way as described in “Opening the
door <In normal condition>” to show the MENU display and
perform “4. PANEL OPEN” operation.
2.1.3 Removing the Magazine
1. Open the door. (Refer to 2.1.2.)
Removing the C-Panel (Printer Panel)
<In abnormal conditions>
Normally the lock is released in the panel-open mode. When
the carrier stops at the lower position and an abnormal condi-
tion occurs, first remove the magazine-1 and magazine-2 (refer
to 2.1.3), hold the chassis section of the carrier mechanism
ass'y and lift the carrier mechanism to the lock release posi-
tion.
2. Pull the release lever which locks the magazine toward you.
The magazine is slightly protruded toward the front.
3. Grasp the grip to remove the magazine toward you.
4. When loading the magazine, insert the magazine gently until
it clicks.
Screw
Magazine 2
Magazine 1
C panel
Release Lever
Grip
2-3