JVC MC-8100U, Руководство по обслуживанию, Страница: 30 / 100

26
Magazines
9-3. Automatic disc checking function
Checking the operation modes.
Press and hold the MODE key for more than 5 seconds.
If a magazine was removed and reinstalled after the power has been turned on, this function will automatically check the disc
status inside the magazine.
• The factory default setting for the automatic disc checking function is on.
A U T O D I S C C H E C K :
O N
A U T O D I S C C H E C K :
O F F
Switching the operation modes
Operation modes will alternate (toggle) when you turn the power off, and then on while pressing both the SELECT key and
the LOAD/EJECT keys simultaneously.
Automatic disc checking function ON
Automatic disc checking function OFF
s
Depending on the management software used, you may still have to update the disc status data of the host computer
even after the automatic disc checking function has updated the disc status data of a magazine.
CAUTION
• Never use a damaged and/or warped disc. It will lead to malfunction of the equipment.
• If you are going to use a disc from the different drive, please check the drive specifications carefully before using it.
(Some drives may not be able to read the disc.)
(At the same time, the equipment may not be able to read the disc which has been written and deleted in a different
drive.)
• Note that some double-sided discs do not provide a distinction between the top and bottom sides. Take special care
when removing/loading these discs from/in the MC-8100U.
Note:
• Media compatible with the MC-8100U varies depending on the drive configuration. For details, refer to the instruction
manuals of the drives.
• When using double-sided discs, handle them with special care because they do not have a label on the surface.