JVC MC-8100U, Руководство по обслуживанию, Страница: 45 / 100

MC-8100U
2.1.14 Removing the Top Panel
1. Open the door. (Refer to 2.1.2.)
2. Remove the side panel L. (Refer to 2.1.7.)
3. Remove the side panel R. (Refer to 2.1.8.)
5. Remove the two blind bolts
^
using a coin, etc.
6. Remove the five screws
&
to remove the top panel.
2.1.13 Removing the Mail Slot
1. Open the door. (Refer to 2.1.2.)
2. Remove the side panel L. (Refer to 2.1.7.)
3. Remove the power supply unit. (Refer to 2.1.10.)
4. Remove the #1 magazine. (Refer to 2.1.3.)
5. Insert your hand into the #1 slot and gently push the tray of
the mail slot. Pay attention not to push the tray forcibly for it
could damage the gear teeth.
6. Gently pull out the mail slot tray toward you and push the
guide to the main unit side. Remove a screw
#
and pull out
the mail slot panel by sliding it toward the left.
9. Remove the mail slot from the front of the main unit.
8. Disconnect the connector cable on the mail CN PCB, and
remove the two screws
%
.
Guide
Mail slot panel
#
Connector cable
%
^
&
&
$
$
7. Remove the six screws
$
to remove the front panel of the
main unit.
2-8