English
- 35 -
INSTALLING USING A WALL MOUNTING
INSTALLING / REMOVING THE STAND
WARNING:
The LCD display is very fragile, and must be protected at all times when installing / removing
the stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display,
comes into contact with it. Do NOT put pressure on the front of the unit at any time because the screen could
crack.
Disconnect any cables or cords connected to the unit.
1.
Lay the unit down on a fl at surface, so the back is facing up, making sure to place a soft cushioned
2.
material (such as a pillow or thick piece of foam) beneath the screen.
Install / remove the four screws and then install / remove the STAND to / from the TV as shown below
3.
in pictures A and B.
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESAcompliant 200mm x 200mm
mounting kit designed for fl at-panel TVs (sold separately). Mount this unit according to the directions included
with the mounting kit.
Note:
Remove the stand before mounting the unit on the wall.
IMPORTANT
Screws must not project more than 8mm into the TV or damage may occur. FOR secure fi xing make sure at
least 4mm of the screw thread is engaged and the total thread lenght is less than 14mm.
Four mounting holes
A
B
